Browse by Type

Department for Communities and Local Government, (2020) Diagram D2 Cubic capacity. [Image]

Department for Communities and Local Government, Department (2019) Requirement B1: Means of warning and escape. [Image]

Department for Communities and Local Government, (2019) Table 3.1 Limitations on travel distance in common areas of blocks of flats. [Image]

Department for Communities and Local Government, (2019) Diagram 9.1 Enclosure for drainage or water supply pipes. [Image]

Department for Communities and Local Government, (2019) Diagram 9.2 Pipes penetrating structure. [Image]

Department for Communities and Local Government, (2019) Table 9.1 Maximum nominal internal diameter of pipes passing through a compartment wall/floor. [Image]

Department for Communities and Local Government, (2019) Diagram 9.3 Ductwork passing through protected escape routes – method 2 or method 3. [Image]

Department for Communities and Local Government, (2019) Diagram 9.4 Ductwork passing through protected escape routes – method 4. [Image]

Department for Communities and Local Government, (2019) Diagram 2.1 Means of escape from dwelling houses. [Image]

Department for Communities and Local Government, (2019) Diagram 2.2 Alternative arrangements for final exits. [Image]

Department for Communities and Local Government, (2019) "Diagram 2.3 Alternative cavity barrier arrangements in roof space over protected stairway in a house with a storey more than 4.5m above ground level". [Image]

Department for Communities and Local Government, (2019) Diagram 2.4 Fire separation in a dwellinghouse with two or more storeys more than 4.5m above ground level. [Image]

Department for Communities and Local Government, (2019) Diagram 2.5 Ground or basement storey exit into an enclosed space. [Image]

Department for Communities and Local Government, (2019) Diagram 2.6 Gallery floors with no alternative exit. [Image]

Department for Communities and Local Government, (2019) Diagram 2.7 Fire resistance of areas near to external stairs. [Image]

Department for Communities and Local Government, (2019) Diagram 3.1 Gallery floors with no alternative exit. [Image]

Department for Communities and Local Government, (2019) Diagram 3.2 Flat where all habitable rooms have direct access to an entrance hall. [Image]

Department for Communities and Local Government, (2019) Diagram 3.3 Flat with restricted travel distance from furthest point to entrance. [Image]

Department for Communities and Local Government, (2019) "Diagram 3.4 Flat with an alternative exit, but where all habitable rooms have no direct access to an entrance hall". [Image]

Department for Communities and Local Government, (2019) "Diagram 3.5 Multi-storey flat with alternative exits from each habitable room, except at entrance level". [Image]

Department for Communities and Local Government, (2019) Diagram 3.6 Multi-storey flat with protected entrance hall and landing. [Image]

Department for Communities and Local Government, (2019) Diagram 3.7 Flats served by one common stair. [Image]

Department for Communities and Local Government, (2019) Diagram 3.8 Flats served by more than one common stair. [Image]

Department for Communities and Local Government, (2019) Diagram 3.9 Common escape route in small single stair building. [Image]

Department for Communities and Local Government, (2019) Diagram 3.10 External protection to protected stairways. [Image]

Department for Communities and Local Government, (2019) Diagram 3.11 Fire resistance of areas near to external stairs. [Image]

Department for Communities and Local Government, (2019) Table 4.1 Classification of linings. [Image]

Department for Communities and Local Government, (2019) Diagram 4.1 Lighting diffuser in relation to ceiling. [Image]

Department for Communities and Local Government, (2019) Diagram 4.2 Layout restrictions on class D-s3, d2 plastic rooflights, TP(b) rooflights and TP(b) lighting diffusers. [Image]

Department for Communities and Local Government, (2019) Table 4.2 Limitations applied to thermoplastic rooflights and lighting diffusers in suspended ceilings and class D-s3, d2 plastic rooflights(1). [Image]

Department for Communities and Local Government, (2019) Diagram 4.3 Layout restrictions on small class D-s3, d2 plastic rooflights, TP(b) rooflights and lighting diffusers. [Image]

Department for Communities and Local Government, (2019) Diagram 5.1 Separation between garage and dwellinghouse. [Image]

Department for Communities and Local Government, (2019) Diagram 5.2 Junction of compartment wall with roof. [Image]

Department for Communities and Local Government, (2019) Diagram 5.3 Cavity walls excluded from provisions for cavity barriers. [Image]

Department for Communities and Local Government, (2019) Diagram 7.1 Construction of protected shafts. [Image]

Department for Communities and Local Government, (2019) Diagram 7.2 Uninsulated glazed screen separating protected shaft from lobby or corridor. [Image]

Department for Communities and Local Government, (2019) Diagram 8.1 Provisions for cavity barriers. [Image]

Department for Communities and Local Government, (2019) Diagram 8.2 Cavity walls excluded from provisions for cavity barriers. [Image]

Department for Communities and Local Government, (2019) Diagram 8.3 Fire resisting ceiling below concealed space. [Image]

Department for Communities and Local Government, (2019) Diagram 8.4 Provisions for cavity barriers in double-skinned insulated roof sheeting. [Image]

Department for Communities and Local Government, (2019) Diagram 9.5 Flues penetrating compartment walls or floors. [Image]

Department for Communities and Local Government, (2019) Table 10.1 Reaction to fire performance of external surface of walls. [Image]

Department for Communities and Local Government, (2019) Diagram 11.1 Principles of space separation. [Image]

Department for Communities and Local Government, (2019) Diagram 11.2 Relevant boundary. [Image]

Department for Communities and Local Government, (2019) Diagram 11.3 Notional boundary. [Image]

Department for Communities and Local Government, (2019) Diagram 11.4 Status of materials achieving class B-s3, d2 or worse as unprotected area. [Image]

Department for Communities and Local Government, (2019) Diagram 11.5 Small unprotected areas that may be disregarded in assessing the separation distance from the boundary. [Image]

Department for Communities and Local Government, (2019) Diagram 11.6 The effect of a canopy on separation distance. [Image]

Department for Communities and Local Government, (2019) Diagram 11.7 Permitted unprotected areas in small residential buildings. [Image]

Department for Communities and Local Government, (2019) Table 11.1 Permitted unprotected areas in small buildings or compartments. [Image]

Department for Communities and Local Government, (2019) Diagram 12.1 Limitations on spacing and size of plastic rooflights that have a class D-s3, d2 or TP(b) lower surface. [Image]

Department for Communities and Local Government, (2019) Table 12.1 Limitations on roof coverings. [Image]

Department for Communities and Local Government, (2019) Table 12.2 Class D-s3, d2 plastic rooflights: limitations on use and boundary distance. [Image]

Department for Communities and Local Government, (2019) Table 12.3 TP(a) and TP(b) thermoplastic rooflights: limitations on use and boundary distance. [Image]

Department for Communities and Local Government, (2019) Diagram 13.1 Turning facilities. [Image]

Department for Communities and Local Government, (2019) Table 13.1 Typical fire and rescue service vehicle access route specification. [Image]

Department for Communities and Local Government, (2019) Diagram 15.1 Components of a firefighting shaft. [Image]

Department for Communities and Local Government, (2019) Diagram 15.2 Provision of firefighting shafts. [Image]

Department for Communities and Local Government, (2019) Diagram 15.3 Location of firefighting shafts: hose laying distances. [Image]

Department for Communities and Local Government, (2019) Diagram 16.1 Fire resisting construction for smoke outlet shafts. [Image]

Department for Communities and Local Government, (2019) Table 0.1 Classification of purpose groups. [Image]

Department for Communities and Local Government, (2019) Requirement B2: Internal fire spread (linings). [Image]

Department for Communities and Local Government, (2019) Requirement B3: Internal fire spread (structure). [Image]

Department for Communities and Local Government, (2019) Requirement B4: External fire spread. [Image]

Department for Communities and Local Government, (2019) Requirement B5: Access and facilities for the fire service. [Image]

Department for Communities and Local Government, (2019) Regulation 38: Fire safety information. [Image]

Department for Communities and Local Government, (2019) Table B1 Reaction to fire classifications: transposition to national class. [Image]

Department for Communities and Local Government, (2019) Table B2 Roof covering classifications: transposition to national class. [Image]

Department for Communities and Local Government, (2019) Table B3 Specific provisions of the test for fire resistance of elements of structure, etc. [Image]

Department for Communities and Local Government, (2019) Table B4 Minimum periods of fire resistance. [Image]

Department for Communities and Local Government, (2019) Table B5 Limitations on the use of uninsulated glazed elements on escape routes. These limitations do not apply to glazed elements that satisfy the relevant insulation criterion, see Table B3. [Image]

Department for Communities and Local Government, (2019) Table C1 Provisions for fire doorsets. [Image]

Department for Communities and Local Government, (2019) Diagram 3.7 (b) Flats served by one common stair. [Image]

Department for Communities and Local Government, Diagram D1 Measurement of door width. [Image]

Department for Communities and Local Government, Table D1 Floor space factors. [Image]

Department for Communities and Local Government, Diagram D3 Area. [Image]

Department for Communities and Local Government, Diagram D4 Height of building. [Image]

Department for Communities and Local Government, Diagram D5 Number of storeys. [Image]

Department for Communities and Local Government, Diagram D6 Height of top storey in building. [Image]

Department for Communities and Local Government, Diagram D7 Free area of smoke ventilators. [Image]